60W Single-port Lightning-proof PoE Power Supply Gigabit Power Over Ethernet Injector
If you have any usage problems or are not satisfied with our products, please feel free to contact us, our professional customer service team will sincerely consult the problem. PROCET provides customers with high quality and stable PoE power supply and corresponding services.
| Parameter | Description |
| Pass Through Data Rates | 10/100/1000 Mbps |
| Output | Pin Assignment and Polarity: |
| 4/5 (+), 7/8 (–) and 3/6 (+), 1/2 (–) |
| Output Power Voltage: 55Vdc |
| User Port Power: 60W Guaranteen |
| Input | AC Input Voltage: 100-240 Vac |
| Frequency: 47 to 63Hz (50/60Hz Typ.) |
| AC Input Current:1.5A |
| Working Environment | Operating Temperature: 0℃ to 40℃ |
| Operating Humidity: 20% to 80%, non-condensation |
| Storage Temperature: -20℃ to 70℃ |
| Storage Humidity: 10% to 90%, non-condensation |
| Operating Altitude: up to 5000meters |
| PoE Surge Protection | Protected line: 1,2,3,4,5,6,7,8 |
| Common mode surge protection(10/700us): 6KV |
| Differential mode surge protection (10/700us): 1.5KV |
| Line-Earth 1.2/50us (8/20us): 6KV |
| Line-Line 1.2/50us (8/20us): 4KV |
| AC Surge Protection | Line-Earth 1.2/50us (8/20us): 2KV |
| Line-Line 1.2/50us (8/20us): 1KV |
| Safety Approvals | cUL/UL/FCC/CE/PSE/SAA/BIS |
Durable Case PoE Injector: IP40 Fire-retardant Plastic Enclosure, with 6KV Lightning Protection common mode surge protection and 2KV AC Surge Protection.
What's the PoE Power Indicator mean?
1. The Active indicator is green when power is less than 30W(Half Load)
2. Solid green active led means our PoE can classify your device and power up your equipment
3. The Active indicator is blue when power is greater than 30W(Half Load) and less than 60W(Full Load)
4. Solid blue active led means our PoE can classify your device and power up your equipment
5. Flashing all the time means our PoE cant classify your device and reject to power up your equipment.
About Procet PoE Injector
Since the ratification of the first PoE standard in 2003, PoE use has increased dramatically and made headway into new applications. PoE provides huge benefits in relation to ease of installation, saving CAPEX and OPEX costs, and providing a unified and safe power standard for worldwide use.
The main limiting factor affecting PoE use in new applications is the amount of available power. While 15.4W at the power source is sufficient for most IP phones and 802.11a/b/g access points, it is not enough for IP video phones, 802.11n, and pan-tilt-zoom (PTZ) IP cameras. For that reason, the Institute of Electrical and Electronics Engineers, or IEEE, released IEEE 802.3at-in 2009, specifying 30W at the PoE source.
Today there is a demand for even higher power to support additional devices connected to the Ethernet network, such as PTZ security cameras, kiosks, POS terminals, thin client, 802.11ac and 802.11ax access points, small cells, and connected LED lighting, all of which can benefit from PoE.
The new IEEE 802.3bt standard increases the maximum PoE power available mainly by utilizing all four pairs of the structured wiring. IEEE802.3bt extends the power classification information exchanged during initial negotiation to allow meaningful power management capability, enabling support of multiple PoE classes, while also being backward compatible. These enhancements solve the challenge of higher power and more efficient PoE delivery systems.
IEEE 802.3bt Call for Interest (CFI) activity started in early 2013, and the ratification of the standard took place in September 2018. The new standard addresses the existing market needs and is considered a major catalyst to PoE market growth as it facilitates the expansion of PoE use cases by pushing the power limit of Power Sourcing Equipment (PSEs) and Powered Devices (PDs) to 90W and 71.3W respectively
WELCOME TO PROCET
Operating since 2000
PROCET(Creative Lianjie Network Technology Co.,Ltd) estblished in 2000. PROCET mainly R&D on the PoE (Power over Ethernet) series product, Outdoor PoE, indoor PoE, Lightning&surge protection PoE, -40℃ to +65℃ PoE, PoE splitter, PoE extender. We registered PROCET Technology Co., Ltd in HONGKONG in 2019.
R&D Engineer Team
PROCET's engineers used PoE on 2002, and then mainly focus on PoE since 2003 the IEEE802.3AF standard comes out. We got our first paten on single-port PoE on the end of 2003.
Our PoE engineers have experience more than 15 years by now. They started to R&D the surge on PoE using, and now they have great contribution on our outdoor PoE series.
Production quality assurance
We keeped our stable production workers, four QC with at least 4 years experience to make sure the production.
We have aging testing, high-low temperature testing, surge testing, drop testing, swing testing before delivery.
We have CCC, CE,FCC,UL,TUV certification for our PoE.
OEM&ODM serives
We do OEM serives. Our MD engineer can help to design the LOGO, the label, the package, even the Housing.
We do ODM serives too, special on the high power PoE solutions, the Boost-Buck voltage PoE, AC/DC surge PoE
Product Tags:
|
|
60w 802.3bt Poe Injector Single Port Lightning Proof Power Supply Gigabit Images
|
